Brick & Limestone

The contemporary look of the twenty foot high window openings

add contrast to the antique brick facade. When complete, the

original wooden beam will be clad in stainless steel with

the windows framed in mahogany.

Discussing final brick touch-ups before the reveal.

Each limestone block needs careful levelling.

The mason's assistant measures and marks a piece of limestone

which will dress the window openings on the facade.

The masons worked quickly, salvaging the old bricks and using

them to build the new openings for the atrium. After completion,

we looked out the study window and noticed that one of the

bricks bore the 100 year old print of a cat's paw.

The story of brickmaking is an important part of Toronto's

history. By the time our building was built circa 1909 there

were 34 brickyards in Toronto. The Don Valley Brick Works

(in operation from 1889 - 1989) led production with

a yearly quota of over 43-million bricks.

Soft mud, "John Price" bricks were made by tempering a

clay-sand mixture with up to 30 per cent water. This mixture

was forced into molds dusted with sand and chemicals.

Various proportions of borax, ferro-red or manganese dioxide

were used to produced the desired colour. After a series

of drying processes, the bricks were fired in small tunnel kilns.

To retain the character of the Dupont Street facade with respect

to the neighbouring buildings, it was critical to re-point and

replace the old bricks on the front and west side of the

building. Extra bricks from the atrium cut-away were saved

and used where needed.

Framing completed

Framing is now complete. The south-facing window wall features

a 17 foot sliding glass mahogany door and 8 large mahogany windows.

The north facing view into the house shows the cantilevered

master bedroom on the second floor which overlooks a two-story

open concept living area. A second story skylight in the

master dressing room is visible at top right

The view from the open concept living area looks onto a private

courtyard garden. A covered walkway will link the main house

to the two-car garage and studio/apartment above

This west-facing view from inside the study shows the atrium

which will house a small interior garden and side entry door

This view shows the main floor interior from the front entryway,

through the atrium, study, open concept kitchen/living room,

into the courtyard-garden area beyond

Mason's are now working on the building's facade cutting

three 20 foot high openings to accommodate five

mahogany windows, and a transom over the mahogany slab

front door. The openings will be dressed in limestone

and a corten steel panel will join the three openings

The atrium opening widens what was formerly

a narrow walkway bringing light into the building

Masons have completed the two-storey atrium

cut into the west wall of the building

New Roof, Framing & Masonry

Rear curtain wall will hold 8 upper windows and

one lower 17 foot sliding glass door

Interior view of curtain wall framing

Framing of rear curtain wall begins

Bulkhead for lighting and roof drains installed

Permits for walk-through scaffold allow masons to set up

Hydro wires have been wrapped for masonry work

on the face of the building

Two-story atrium opens up the former narrow passageway

and brings light into the building

View from front entryway through atrium shows

the curtain wall opening and garage

Masons re-purposed the original 100 year-old bricks

to complete the atrium opening

New roof goes on